Aquamec
Panel sealed solution, Non illuminated:-
Aquamec is a switch solution that has IP67 sealing from the front panel. It has variable height options and is mounted on Multimec 3F series switch.

Panel sealed solution, illuminated:-
Aquamec is a switch solution that has IP67 sealing from the front panel. The series is based on the Multimec 3F or 4F series switch and can provide excellent illumination with the transparent cap.

Controlmec
Panel sealed navigation solution:-
1ZW is Contolmec with panel sealing. Controlmec is a five position integrated switch solution designed for outdoor, dusty and humid applications, to control a unit, navigate in a display or operate auxiliary equipment. This solution uses the Multimec 5 series switch.

Under Foil Solutions
Black round Cap for foil overlay 1GA/1GC:-
1GA/1GC series are black round ø11 mm and ø15 mm caps. They are excellent for use beneath a foil overlay.

Fully illuminated Cap for foil overlay, Foilmec 1YS:-
1YS is a cap especially designed for foil overlay. It can be fully illuminated and has a SMD option, and is used with the Multimec 5E series switch.

Round Cap with soft edges for foil overlay, 1JS:-
1JS cap series is just 10.4 mm high used with the Multimec 5G switch making it one of the lowest illuminated caps in MEC range. The cap is excellent for foil overlay. It was designed with soft edges in order to extend the lifetime of the foil.

Small round Cap for foil overlay:-
1SS/1LS/1IS cap series provides flexibility in colour as well as in height. Illumination can either be full (1IS) or dot (1LS). This series of illuminated caps are used with the Multimec 5G switch, and solid colour caps can be mounted on both types of 5 series switches.

Tactile switch with variable heights for foil overlay:-
Multimec 3E series switches have 6 standard height options allowing the designer to mount the PCB away from the foil. 3E has an actuator extending from the switch body.

Tactile switch for over-mould and foil overlay:-
Simplicity and reliability makes the multimec 3C an excellent switch for foil overlay as it can still function even if the overlay breaks and an upgrade can be done by changing the foil and not the PCB, which is very cost-effective. In addition the switch is great for build-in and over-mould solutions.