Catalogue | Multimec Switches Single Pole 3F series Multimec
Keystone Electronics Corporation Batteries Battery HoldersMEC Multimec Switches and Unimec Switches MEC Unimec Switches Double Pole Unimec seriesTactile Switches, Slide Switches and Push Switches Transistor Insulating Bushes and Shoulder WashersTransistor Insulating Washers in Aluminium Oxide / Mica / Laird Tech Silicone Rubber Transistor Insulating Kits MK Series, Diode Insulating KitsTransistor Mounting Pads (Transipads) & Plastic PCB Hardware Solder Tags, Solder Lugs & Terminals from Collett Utilux (Klauke) Tags & TerminalsRoss Courtney, Oddie & SavignyAssmann-WSW Connectors IDC Connectors from SpeedTajimi Connectors (TMW) Metal Circular ConnectorsConnector Kitting ServiceNeon Indicators for Panel MountLED Indicators for Panel MountMetric Spacers Standoffs & PillarsIMO Electronics DIN Rail Plastic Housings and DIN Rail Enclosures from ElbagOtto Controls
Through-Hole High Temp P/B tactile Switch with level actuator 3ATH9 Multimec
Through-Hole High Temp P/B tactile Switch with level actuator  3ATH9 Multimec
Through-Hole High Temp P/B tactile Switch with level actuator  3ATH9 Multimec
Through-Hole High Temp P/B tactile Switch with level actuator  3ATH9 Multimec
Multimec 3A is for caps with hinges in order to imitate rocker-function switches. Due to the type of cap, the travel of the 3A switch is 2 mm. There is also an illumination option with LED mounted on the switch.

Specifications:

•through-hole
•50mA/24VDC
•single pole
•momentary
•10.000.000 operations lifetime
•sealed to IP67
•3.5N actuation force
•temperature range: -40/+160ºC
Multimec 3A series can supplied with an LED. LED colours: blue, green, yellow and red.

Multimec 3A series has an actuator level with the switch body.

Possible caps: 1A/1H/1M/1ZA; 1B/1C+2C/2D; 1ZB

NOTE: By 2013, the 3A series will be phased out in favour of the 5G series
See data below for the 5G series.