Catalogue | MEC Switch Caps and Accessories
Keystone Electronics Corporation Batteries Battery HoldersMEC Multimec Switches and Unimec Switches MEC Unimec Switches Double Pole Unimec seriesTactile Switches, Slide Switches and Push Switches Transistor Insulating Bushes and Shoulder WashersTransistor Insulating Washers in Aluminium Oxide / Mica / Laird Tech Silicone Rubber Transistor Insulating Kits MK Series, Diode Insulating KitsTransistor Mounting Pads (Transipads) & Plastic PCB Hardware Solder Tags, Solder Lugs & Terminals from Collett Utilux (Klauke) Tags & TerminalsRoss CourtneyAssmann-WSW Connectors IDC Connectors from SpeedTajimi Connectors (TMW) Metal Circular ConnectorsConnector Kitting ServiceNeon Indicators for Panel MountLED Indicators for Panel MountMetric Spacers Standoffs & PillarsIMO Electronics DIN Rail Plastic Housings and DIN Rail Enclosures from ElbagOtto Controls
MEC Multimec Switches and Un.. > MEC Switch Caps and Accessories
MEC Switch Caps and AccessoriesA huge range of MEC Switch Caps offering many possible aesthetic options to the designer.

Call on 01732 810370 or email info@mecint.co.uk
Softline Caps
Softline Caps
Softline Caps:-
1T/1U/1V are soft line caps with great illumination possibility. 1T is a square shaped, 1U round and 1V half-ellipse shape. The caps have a rounded top that provides good tactile feel to the operator. Used with the Multimec 3F switch, or 4F.

Teardrop-shaped illuminated Cap:-
1N cap has an interesting shape and provides unique design options.

Ellipse shaped Caps:-
1WA/1WD/1WP caps are in a shape of an ellipse. 1WA and 1WD have a rounded top, 1WP cap has a convex top.
Round Caps
Round Caps
Round Cap Ø9.6 mm:-
1D/1E/1F cap series consists of round caps with Ø9,6 mm and overall height with the 3F & 4F switch is 14,9mm. 1D can be provided in solid as well as transparent colour for illumination. 1E is a cap in solid colour with a small round lens and 1F is also a cap in solid colour but has a large round lens on the top.

Round Cap Ø14.3mm with a rounded top:-
1ZC cap provides excellent feeling with its rounded top. The cap can be used as a stand-alone product or with the 1ZB cap for Navimec solution. 1ZC cap is Ø14.mm and the overall height with 3F or 4F switch is 11.7mm.

Round Cap with a rounded top:-
1U is a 'Softline' cap with great illumination possibility. The cap has a rounded top that provides good tactile feel to the operator.

Flat Round Caps for foil overlay:-
1GA/1GC caps are flat round caps designed for use under a foil overlay. 1GA is Ø11mm and 1GC is Ø15mm. The caps can be used as stand-alone products.
NEW in February 2012 are the 1GAS and 1GCS for mounting on the Multimec 5G switch. These new caps have 8 standard colours, and the new frosted white option gives excellent illumination when used with a coloured illuminated switch.

Tall Cap with variable heights, 1S:-
1S is a tall cap with a small round surface, and offers 3 different standard overall heights from 16.0mm-22.5mm. It is available is solid colour black, or in transparent for illumination. Can be used with the 2S Extender to achieve many other height options. 1S and 2S are used with the 3F and 4F series switches.

Low Round Cap for foil overlay:-
1JS cap series is just 10.4 mm high and only used with the Multimec 5G switch making it the lowest illuminated cap in MEC product range. The 1JS is Ø9,6mm. The cap is excellent for foil overlay. It was designed with soft edges in order to extend the lifetime of the foil.

Round Waterproof Cap:-
Aquamec is a switch solution that has IP67 sealing from the front panel. Cap is supplied either in black or transparent colour. The cap uses the Multimec 3F or 4F series, and can provide excellent illumination with the transparent cap.

Small Round Cap:-
1SS/1LS/1IS cap series provides flexibility in colour as well as in height. Illumination can either be full (1IS) or dot (1LS). The illuminated caps are used with Multimec 5G switch, solid colour caps can be mounted on both 5 series switches.
Rectangular Caps
Rectangular Caps
Rectangular Cap:-
1P/1Q/1R is a series of 6.5 mm x 12.5 mm rectangular caps used with the 3F / 4F switch. 1P cap is provided in 7 solid colours and 2 transparent colours. 1Q with a rectangular lens in the middle and 1R with a round lens.
Also available are the 1PS/1QS/1RS for use with the 5G switch.

Rectangular Cap with rounded edges:-
1X series provides options in illuminated and non-illuminated rectangular caps. Cap is 9.4mmx7.4mm and has rounded edges.

Rocker-function pushbutton Caps:-
1A/1H/1M/1ZA series offer many sizes in rectangular caps. 1A/1H are 10.1x12.5 mm, 1ZA 10.1x18.65mm and 1M 10.1x25.0mm. Illumination can be created with transparent 1A cap or solid 1H cap with a lens.

Rectangular pushbutton Cap:-
Cap 16300 is a rectangular cap designed for pushbutton switch series Unimec.
Square Caps
Square Caps
Square Cap with a rounded top:-
1T is a Softline cap with great illumination possibility. The cap has a rounded edges that provides good tactile feel to the operator.

Square Caps with extra tactile feel:-
1K/1KB/1KC are square caps with excellent illumination possibility. 1K has a flat top, 1KB a concave top and 1KC a convex top, and all can be used with the Multimec 3F & 4F switches.

Rocker-function pushbutton Cap solution:-
1B/1C caps with 2C/2D bezel are a rocker-function pushbutton solution. The cap is adjusted into the bezel and bezel is snapped on to the switch. It provides many options in colours as well as illumination. These caps and bezels are used with the 3A switch.

illuminated Square Cap for foil overlay:-
1YS is a cap especially designed for foil overlay. It can be fully illuminated and has a SMD option and is used with the Multimec 5E switch.

Square pushbutton Cap:-
Cap 16700 is a square cap designed for use with Unimec pushbutton switches. It is 14.9mm x 14.9mm.
Navigational Style Caps
Navigational Style Caps
Navimec 5-piece switch solution:-
Navimec is a five position switch solution ideal for data entry devices where joystick function is needed. It has a select switch in the middle and four navigational switches around it. The solution is available as a module, as well as single parts for own PCB mounting. Navimec uses 3A & 3F switches. An illuminated version is also available.

Controlmec 1-piece navigation Cap:-
1Z is Controlmec without panel sealing. Controlmec is a five position integrated switch solution to control a unit, navigate in a display or operate auxiliary equipment. The solution is based on the Multimec 5 series switch.

Controlmec panel sealed navigation solution:-
1ZW is Contolmec with panel sealing. Controlmec is a five position integrated switch solution designed for outdoor, dusty and humid applications, to control a unit, navigate in a display or operate auxiliary equipment. The solution uses the Multimec 5 series switch.
Variable Height Caps
Variable Height Caps
Switch for variable height caps, 3E series:-
3E is a switch where the actuator is mounted into the hole in the switch body. The switch offers 6 standard overall height options from 8.0mm-15.0mm. 3E is available as a through-hole switch or SMD, and in low and high temperature versions.

Tall Cap with variable heights, 1S:-
1S is a tall cap with a small round surface, and offers 3 different standard overall heights from 16.0mm-22.5mm. It is available is solid colour black, or in transparent for illumination. Can be used with the 2S Extender to achieve many other height options. 1S and 2S are used with the 3F and 4F series switches.

Small variable height round Cap:-
1SS/1LS/1IS cap series provides flexibility in colour as well as in height. Illumination can either be full (1IS) or dot (1LS). NEW HEIGHTS of 16mm, 19mm and 22.5mm are now available. The illuminated caps are mounted on Multimec 5G switch, solid colour caps can be mounted on both 5E and 5G series switches.
Accessories
Accessories
Extender for Multimec 3F switches, 2S:-
2S is a extender for Multimec 3F in order to create variable heights.

Extender for Unimec rectangular Cap 16300:-
Unimec 16270 is used as an extender on the switch actuator for button 16300 when used with the tall rectangular cap 16324-16326.

Square Unimec bezel with optional rectangular lenses:-
Unimec 16324-16326 are three tall bezels for Unimec button 16300, with different rectangular lenses.

Square Unimec bezel with optional round LEDs:-
Unimec 16310-16315 are four bezels for use with Unimec 16300 cap. Bezels differ with the number of pin holes for round LEDs.

Square blanking Cap:-
Unimec 16800 is a blanking cap to close off a Unimec switch when used in an array.

Vario support for Unimec switches:-
Vario support is for all types of Unimec switches with bezels 16310-16315 and 16324-16326, and is used to correctly space Unimec switches when mounted in an array.